ATI Continues to Serve its Valued Customers During Unprecedented Times
|
|
As the spread of COVID-19 novel coronavirus continues to make an impact globally, ATI wants you to be aware that its team is continuing to take steps to minimize disruption to its operations while ensuring the health and safety of it's employees, their families, and other key stakeholders.
Currently ATI Headquarters is still fully operational, however there may be some regional service delays due to local COVID-19 response compliance or part shortages. Please contact your local sales office for more details.
|
|
New Klaric High Voltage Module with Ethernet and CAN
|
|
ATI, along with its partner Klaric, is proud to announce the release of the KLARI-PA1000, a high voltage, mobile, power analyzer for various measurement tasks in vehicle or in the lab. The KLARI-PA1000 will be replacing the EOLed KLARI-PA625 starting immediately.
KLARI-PA1000 Features:
- 4 Inputs
- 8 Channel
- 1 MHz Sample rate
- 1,500 V galvanic isolation
- Online calculation of power, work, power factor, RMS values, frequency
- Sample rate from 1.25 Hz to 1 MHz per channel
- 1 Gbit/s XCP-on-Ethernet or Klaric-Server
- 2 independent 1 MBaud CAN-Interfaces
- Automatic Probe identification (similar to TEDS)
|
|
Updated EMX Hardware Configuration Utility
|
|
|
An updated version of the Hardware Configuration Utility has been released. To download the most up-to-date version of the Hardware Configuration Utility, please log into the ATI support portal at the link below.
|
|
CAN Datalogging - ATI/Kvaser Webinar
|
|
|
Accurate Technologies (ATI) and Kvaser are holding a joint webinar in Chinese on December 2nd (9:30AM Beijing time) to explain how to use the Kvaser-ATI toolchain to log, import, and analyze vehicle CAN data. The 60-minute webinar will demonstrate how to use a standalone CAN datalogger to record vehicle data and import that data into analysis software. Topics will cover logger configuration, DBC file usage, import/export process, file formats, and signal analysis.
|
|
|
Mr. Xiaojun ZHENG, KVASER Application Manager, will teach the specifics of using Kvaser Memorator series products for CAN data recording, while Dr. Yonghui ZHANG, ATI Application Manager, will provide a tutorial on handling the data in the CANLab software.
|
|
Kvaser, Basic to Advanced Products Walkthrough
|
|
ATI and Kvaser are holding a joint webinar on December 14th and 15th (Central EU Time). The 60-minute webinar will cover Kvaser's toolchain with key focus on Ethernet based products such as EtherCAN, BlackBird & DIN Rail.
Other Topics Covered in Webinar:
- Configuration and application examples
- Air Bridge – application ideas, and when to use
- How to setup ATI software with Kvaser interfaces.
- Benefits of migrating to ATI & Kvaser products
|
|
Session 1 - December 14th
13:00 Central EU time
1h + Q&A 15-20min
|
Session 2 - December 15th
10:00 Central EU time
1h + Q&A 15-20min
|
|
|
|
|
Collecting LIN Data with CANary and CANLab
|
|
|
The CANLab Channel Manager is used to associate CAN/LIN channels to the connected hardware used to analyze the network. Channel Manager is not vendor specific, so configuration parameters controlling the hardware are set in the CAN Channel object properties.
|
|
|
|
